|
Available Options
for Model AP, DC, DCSS and AM
|
| |
|
|
|
 Programmable logic controller (PLC) to control the base
functions of the press including multiple job storage, stroke
length, open height point, tonnage, decompression, ram delay/dwell
at bottom of stroke (not under tonnage A mechanical
standard to control limits of the press and is also included even
with PLC.
|
Light curtain
safety barrier system provides infra-red beam during operation and
shuts machi Base op front of press only-other optional
curtains can be quoted per customer specification.
|
| Interlocking side barriers as physical barriers-can be
used in conjunction with light curtains or alone |
|
|
|
|
Special single color paint |
|
|
| Dwell
under tonnage sustains desired tonnage for a set amount of time -
typically used for manufacturers of plastics or fiberglass
products |
|
|
| Custom or special controls per user specifications
|
|
|
| Remote auto cycle for automated operations |
|
|
| Special machining of bed and/or ram |
|
Typical Dayton die cushion mounted under press bed
|
|
| Removable bolster plates for bed |
|
|
|
| Die cushions for drawing and/or part ejection |
|
|
|
| Ejector cylinders for drops or parts |
|
|
|
| Scrap chutes or knockouts to remove drops or parts
|
|
|
|
| Stroke dampers for punching or blanking operations allow
more overall dimensions to increase |
|
 |
|
| Quick change tooling components such as air actuated die
lifters and/or power die removal systems-increase productivity by
decreasing die change and set-up time |
|
|
| High speed or special hydraulic systems |
|
|
| T-slots in bed and ram (2 are standard in bed and ram)
|
|
|
| Automatic lubrication systems to decrease maintenance
operations |
|
W-Technologies stroke
dampers allow more punching and blanking capacity without harming
hydraulic system
|
|
| Safety gear lock systems with interlocking posts provide
even more operator safety (Model AP only) |
|
|
| Additional open height (NOTE: Does not automatically
increase stroke length) |
|
|
| Additional stroke for automatically increase open
height) |
|
|
| Low speed retract allows the ram to return slower than
normal |
|
|
|
| Pressure ram
reversal allows the ram to return when a particular pressure is
achieved. |
| Ram delay at bottom of stroke (not under tonnage)
|
|
|
|
| Coil line processing and material feeding equipment
|
|
|
|
| Custom and standard die sets |
|
|
|
| The model AM, DC
and DCSS can have longer open heights but are limited to a maximum
of 12" stroke as an option |
|
| The model AM is
available in longer lengths but not shorter lengths |
|
| |
|
|
|
 |
