Press
Brake Optional Features |
| |
|
|
|
|
| 
|
|
|
|
|
|  4
Position In-Line depth stop with micrometer adjustable limits
with pedestal mounted selector switch
|
|
Automatic Lubrication
allowing the least amount of maintenance |
|
Wide Flange Beds
Permanent or removable allowing a wide variety of work |
| |
| Ram
Control and Safety Systems
|
| Hand/Foot
Safety Sequence With Footswitch - System that
allows the operator to use a footswitch after the ram hits the
slow speed. |
| Light Curtain
Safety Barrier With Footswitch - Infrared light
system that allows the use of a footswitch during all points of
operation. |
| Extra 2 Hand
Control Station - Extra 2 hand pedestal station
for 2 man control (one pedestal is standard). |
| Extra Footswitch
- For 2 man control in use with Hand/foot sequence
or light curtain system. |
| Low Speed
Retract - Slows the return speed of the ram considerably
when handling heavy, long work pieces, recommended for large press
brakes - Can be turned on/off for small work. |
| 4 Position
In-Line Depth Stop - Pre-set up to 4 different
ram depths with micrometer precision and select all four ram depths
from 4 position selector switch mounted on pedestal. |
| Auto Return
Of Ram - Ram automatically returns to top of
stroke after completion of stroke. |
| Adjustable
Pressure Sensitive Ram Reversal - Protect dies
and work-pieces by setting a maximum pressure and once the pressure
is achieved, the ram reverses. |
| Programmable
Ram Control - Set the Up limit, Speed change,
the Lower limit and many other features with a PLC (Y axis) control.
|
| |
| Lube
Systems
|
| Manifold Centralized
Lube System - All lube points are brought to
a centralized location on the back of the brake for incredibly
simple and fast maintenance. |
| Automatic
Lubrication System - All points are automatically
lubricated with powered pump through an air operated, timed system.
|
| |
| Bed
And Ram Extensions
|
| Wide
x 10' Long Removable Flanges for Bed And/Or Ram - 10" wide precision machined, removable bed and/or ram extensions
x 10' in length between the end frames. (NOTE:
Must be ordered with machining of bed and ram for flanges.)
|
| Mchining For
10" Wide x 10' Long Removable Flanges - Precision
machining to the bed and/or ram required to mount the machined
flanges. |
| Permanent
Bed And Ram Flanges - Non-removable, permanent
flanges for bed and/or ram used for wide dies and pressing applications.
(NOTE: Typical press brake tooling cannot be used w/wide
bed and ram.) |
| Horns For
Bed And Ram - 12" long extensions of the bed
and ram designed to lengthen the bed and ram but not the distance
between housings. |
| |
| Other
Available Options
|
| Decompression
System For Bottoming Applications - Reduces shock to hydraulic system that occurs during bottoming
applications. |
| Die Roll
Bars For Four Way Dies - Convenient hooks in
the ram that aid in turning four way dies. |
| 24" T-Slot
Support/Gauging Arms - Heavy duty T-slotted arms
that provide support for work pieces and allow operators to set
stops in t-slots for gauging purposes. Also available with
scales. |
| Drop Stops
For T-Slot Support Arms - Gravity stops that
allow operators to easily gauge material. |
| 5/8"
T-Slot Across Front Edge Of Brake Bed - T-slot
across edge of bed to move arms left to right. |
| Extra Open
Height - Increases the open height of ram.
(NOTE: Does not increase stroke length.) |
| Extra
Stroke - Increases overall ram stroke.
(NOTE: Does not increase open height.) |
| Extra Throat
Depth - Increases overall throat depth measured
from the centerline of bed. |
| |
All
press brakes are available with up to 6 axis CNC control including
X, Y, R, X1 & X2 and Z1 & Z2 |
